Types of Door Locks for Patio Doors in Aylesbury
A sliding patio door in aylesbury is a excellent way to bring more light into your home. They are easy to maintain, and they are extremely secure.
A customer called in to discuss installing a new lock for their front door. After a variety of options were analyzed, they chose to have a Yale night latch installed and a set of new keys delivered.
Sash Locks
Sash locks are among the most popular types of mortice lock, and are operated by a combination of latches and deadbolts. These locks are fitted within the material of the door and operate with keys to lock or unlock them. They are perfect for both back and front doors since they are secure. Sash locks come in different sizes that can be adapted to all door thicknesses. They can also be used on UPVC and hardwood doors.
There are a variety of types of sashlocks, however the two most popular are the three lever and five lever sashlocks. The five-lever mortice lock is one of most secure choices and is in line with British Standards. It also comes with a striker and face plate that are available in a variety of finishes that match the door knobs or handles. window seal repairs -lever lock is less secure, however it provides adequate security for domestic use. It is also easy to customize, as it has fewer levers, and can be used on all doors in the house.
Another type of sash lock is called the rim-profile the sash lock. They are similar to sash locks, however they are different in that they do not fit inside the door. They are secured to the surface and can be locked from both sides. They are perfect for interior doors that require privacy, such as bathrooms and bedrooms.
A window lock that is sash-based is an excellent way to safeguard your home from intruders as well as ensure your children's safety. These locks prevent the sash opening too far and ensure that your children do not fall out of the windows. They come in a variety of sizes, ranging from 3 inches to 5 inches and are an excellent addition to any window renovation project.
Sash window locks are easy to install, and can be installed at home by any D.I.Y enthusiast. To begin, you will require an ruler and pencil to mark the center point where you wish to put the lock. Once you've marked the central point it is time to remove the screws that were holding the sash. After removal of the screws, clear away any debris that remains or paint flecks. Then you can install the new fastener.
Mortice Locks
A mortise lock is a relatively large mechanism that fits into the door's interior. They are typically found in older buildings as well as newer and more luxurious residential construction. You can still find a mortise-style lock in hardware stores. It's a sturdy and secure option. It's perfect for securing high-traffic areas such as hospitals or schools.

It's important to note that you can't use a mortise lock with a standard knob or handle because the bolt that is slotted into the door will only retract after a key is used. The bolt won't be able move until the knobs are turned, therefore it's essential to choose a handle and knob that fit into the lock case precisely. Refer to the lock diagram in case you're not sure.
Mortice locks are typically constructed from strong materials that can endure wear and tear. They are extremely difficult to break, even under extreme pressure. They are an excellent choice for high-traffic areas, like schools and hospitals where they are exposed to a lot of abuse.
Like rim locks, mortise deadlocks are available in different styles and security levels. For example, there are three-lever mortice sashlocks that are often used for doors that are internal such as bedrooms and inner porches. They aren't as secure as five-lever mortice locks because they are equipped with fewer levers.
If you're considering fitting a mortice lock on an exterior door, be sure to ensure that the lock you purchase is British Standard approved. This will ensure that your door is secure enough to stop intruders from entering your home or the theft of your valuables.
A mortise lock works by locking into the form of a pocket cut into the frame of the door. The pocket is referred to as a 'mortise' and the lock is held in place by an 'lock case' fixed to the door frame using nails or screws. A hard collar is usually placed on the outside of the lock to stop it from being snatched away using a pipe-wrench.
Cylinder Locks
Cylinder locks can be used on uPVC as well as timber or composite doors. They are comprised of two components: the lock that activates the latch or deadbolt, and the cylinder which manages it. This design allows both of the components to be replaced separately should they be required. This is a great option if one of the components is not functioning correctly or if you want to upgrade to a better security cylinder.
The lock cylinder is equipped with series of pin pairs inside it. It is the part of the lock that accepts keys. When the correct key is inserted into the lock cylinder, the notches on it push the pins up to different levels. This allows them to rotate and open the doors. If you use an incorrect key the notches will not align and most of the pins will remain at their original position.
There are many types of cylinder locks including pin tumblers with basic designs to high-security variants that can be resistant to multiple lock picking methods. The more pins that cylinder locks has, the more difficult it will be to pick. A normal cylinder lock will typically have six pins. However, higher security versions may contain up to 13 pins. These pins are also called "security pins". Security pins are available in a variety of varieties, such as spools with narrow waists machined that looks like the cotton spool. They can also be serrated pins that have one or more narrow grooves.
A cylinder lock is simpler to install than a mortise lock because it does not require the frame of your door to be drilled. It's recommended to have the door frame measured and fitted by a professional to ensure that it is positioned correctly. If your door isn't square, you'll have to choose an offset cylinder.
Cylinder locks offer a superior level of security and are less expensive than smart locks. They are a great option for homes that have less security or for those who wish to lock their home quickly. They are particularly efficient if the door has a an already-drilled hole for the lock.
Mullion Locks
A mullion is a central section that divides a double doorway to make it possible for one side of the doorway to function as a single entrance. It can be fixed or removable. Mullions are available in metal, wood or plastic. They can be utilized in conjunction with mortise or rim lock exit devices. They enhance the security of double doors and offer an easier exit than rods that are vertical. They are also suitable for hurricane and fire rated doors.
In a typical setup, the mullion is attached to the frame head and secured to the floor during the construction. However certain mullions are designed to be removed, making them a great choice for commercial applications where the position of the door can change frequently. For example, if a business owner plans to install an employee entrance on the back of their building, they could simply take the mullion off to allow deliveries and larger furniture through the door.
The removal of bolts and screws is required for traditional mullions. These fittings are embedded into the floor or top of the door's frame. This is a tedious and time-consuming procedure that typically requires two people. In time, repeated removals may cause the fittings and mullions to become loose. If the mullions do not remain in place, large machines carts, gurneys and carts are unable to easily move through the opening.
A keyed door mullion that can be removed has been developed to solve this problem. It permits the removal of a mullion quickly and quickly from the top bracket using the rim the cylinder. This is a great option in situations where a large, clear opening in the door is required. The PDQ 9300 Series removable mullions are specifically designed to be used with the 6300/6400 Series Rim Exit Devices that are mounted on pairs of doors. They are also designed to allow the top bracket of the mullion to be lifted from protrusions that extend upwards 42 and 43 on the bottom fitting 20 which is permanently fixed to the floor 14. This releases the latch and the mullion can be temporarily removed. When the mullion is reinstalled the latch will be automatically engaged by the rim cylinder and the locking mechanism is activated.